HPF DIE

1. Forming analysis
- - Major strain check (stiffness)
- - Minor strain check (bending)
- - Slip line, shock line check
- - Wrinkle check
- - Bending check
- - Springback check
- - Material reduction rate check

2. Process design
- - Forming force (production press)
- - PAD'G force
- - Blank holder pressure
- - Bead zone and type
- - Profile and die face
- - Trial shape and blank size
- - Material yield and blank size

3. Die design
- - Die design for production equipment
- - Die design for process
- - Cost-reduction die design
- - Thrust control design
- - Robust structure design
- - Safety design
- - Customer-oriented design

4. Flow analysis
- - Cooling channel flow analysis
- - Upper/lower, PAD, B/H flow analysis
- - Convergence and branch vortex analysis
- - Coolant pressure analysis
- - Coolant channel sizing
- - Coolant channel layout and quantity
HPF DIE

1. Pattern & casting
- - Pattern making
- - Pattern inspection
- - Casting
- - Casting inspection

2. Steel & casting machining
- - Casting, steel, base plate facing
- - Shape steel machining
- - Shape rough/finish machining
- - Heat treatment and polishing
- - Casting + steel assembly
- - Shape face finishing

3. Die parts assembly
- - Pipe parts assembly
- - Pressure parts assembly
- - Gauge assembly
- - Guide parts assembly
- - Accessory assembly
- - Safety parts assembly

4. T/O & quality tuning
- - Tryout for trim line
- - Die matching and tuning
- - Material t check (lead)
- - Formability tryout
- - Quality check after laser cut
- - Corrective action from quality results
CS DIE

1. Forming analysis
- - Major strain check (stiffness)
- - Minor strain check (bending)
- - Slip line, shock line check
- - Wrinkle check
- - Bending check
- - Springback check
- - Material reduction rate check

2. Process design
- - Forming force (production press)
- - PAD'G force
- - Blank holder pressure
- - Bead zone and type
- - Profile and die face
- - Trial shape and blank size
- - Material yield and blank size

3. Layout design
- - Process layout
- - Trim process and scrap flow
- - Forming pressure per process
- - Process reflecting customer requirements
- - Automation layout
- - Safety design
- - Customer-oriented design

4. Process design
- - Process design from layout
- - Structure for production equipment
- - Durability for volume
- - Automation design
- - Robust structure
- - Scrap handling review
CS DIE

1. Pattern & casting
- - Pattern making
- - Pattern inspection
- - Casting
- - Casting inspection

2. Steel & casting machining
- - Casting, steel, PAD, B/H facing
- - Shape steel facing
- - Shape rough/finish machining
- - Steel, cast iron, casting assembly
- - Shape face finishing
- - Trim, FL steel finishing
- - Heat treatment and coating (after final QA)

3. Die parts assembly
- - Guide parts assembly
- - Pressure parts assembly
- - Gauge assembly
- - Trim, pierce, cam parts assembly
- - Accessory assembly
- - Safety parts assembly

4. T/O & quality tuning
- - Tryout for trim line
- - Die matching and tuning
- - Material t check (lead)
- - Formability tryout
- - Quality check after full T/O
- - Corrective action from quality results
HS TRIM'G DIE

1. Process design
- - Trim/cut trim zone
- - Trim process split
- - Relief zone
- - Trim insert zone
- - Trim force and press spec
- - Automation position and method
- - Scrap flow and process split

2. Process design
- - Structure for production equipment
- - Structural stability
- - Steel split and relief
- - Trim insert and structure
- - Automation structure
- - Customer requirement structure
- - Material and reinforcement for volume
HS TRIM'G DIE

1. Pattern & casting
- - Pattern making
- - Pattern inspection
- - Casting
- - Casting inspection

2. Steel & casting machining
- - Casting, steel, PAD facing
- - Shape steel facing
- - Shape rough/finish machining
- - Steel, cast iron, casting assembly
- - Shape face finishing
- - Trim insert WIRE machining
- - Heat treatment and coating (after final QA)

3. Die parts assembly
- - Guide parts assembly
- - Pressure parts assembly
- - Gauge assembly
- - Trim, pierce, cam parts assembly
- - Accessory assembly
- - Safety parts assembly

4. T/O & quality tuning
- - Tryout for trim line
- - Die matching and tuning
- - Material t check (lead)
- - Formability tryout
- - Quality check after full T/O
- - Corrective action from quality results